Solid Bronze Hardware Pine Bark Switch Plate (Double Rocker). Product Number.F-EL-SPDR. Approx. Dimensions: Height: 4-1/2'' x Width 4-1/2''. Custom order please allow, 4-5 weeks delivery. Shown here in the Traditional Patina. Made In American.

Solid Bronze Pine Bark Switch Plate (Single Rocker). Product Number: F-EL-SPSR Approx. Dimensions. H 4-1/2'' x W 2-3/4''. Custom order please allow, 4-5 weeks delivery. Shown here in the Traditional Patina. Proudly Made In America.

If you like horses twice as much as most people, then this solid bronze knob is just for you! Perfect for use in your rustic home as well as on your top of the line tack room and stable cabinetry. Item TBW- KBPL-HS2. 1-3/4 x Protrudes 1- 1/4. 4-5 weeks delivery. Bronze Cabinet hardware knob shown here in traditional patina.

Try our solid bronze Forest Impressions toilet paper holder and we guarantee that you will receive many admiring comments. Pine sticks with small decorative cones are mounted on a vertical pine bark base. The base attaches to the wall with one open and one closed mounting cone - no unsightly screws. 6 3/8 inches.

This solid Bronze bar will easily hold your most luxurious bath towels. Heavy pine sticks with small decorative cones are mounted on a heavy horizontal pine bark base. The base attaches to the wall with two open and two closed mounting cones, no unsightly screws. A perfect towel bar for your log, post and pole or other rustic home. This solid bronze bar will easily hold your most luxurious bath towels. See the close up photo.

We made a very large set of these for CBS IN NEW YORK GUIDING LIGHT STAGE SET. Very gorgeous.

Solid bronze pine branch curtain rods are a stunning addition to any room furnished in a rustic or outdoors theme. The 5/8" diameter rod is molded from a pine branch and has all the knots, bumps and bends of the original - it definitely is not a smooth, straight, machine-made piece....The rod itself is suitable for curtains and lightweight drapes. We have made rods as long as 89" where the customer's curtain was light enough that they did not have to use support brackets between the ends. But keep in mind that if the rod is going to be so long or the curtain so heavy that you will have to use one or more support brackets between the ends, you will not be able to slide the curtains back and forth....To finish your pine branch curtain rod, select appropriate finals from our "Finials & Newel Post Toppers" category. If you aren't going to be sliding the curtain back and forth, consider adding tiny lodgepole or western hemlock cones or small leaves randomly along the length of the rod as additional highlights....For brackets, you have two choices - plain and with set screw cone. The plain bracket is a length of pine branch cut to your specifications and into which is formed a deep "U" shaped depression that the rod simply rests in. This bracket is only suitable for fixed and level applications, not for a rod mounted at an angle, on a moveable surface or in a place where it might be dislodged. The bracket with the set screw cone is just like the plain bracket except that one of our open lodgepole mounting cones with a set screw on the back screws through the face of the bracket and into a pre-drilled hole in the rod, holding it firmly in place....Each of our curtain rods is made to your specifications. Call us to discuss your specific project and we will work up a formal quote for your consideration. The image above was taken of an 18'' prototype rod with medium lodgepole finials. The end mounting brackets incorporate mounting cones with set screws, while the center support illustrates the plain mounting bracket. Complete piece will cost a minimum of $10 per inch by the time the finials and mounting brackets.

Bronze Sculptured Rainbow Trout by the renowned woodcarver and master bronze man Greg Scott. This is a signed limited edition sculpture of 20. You will want this one in your personal collection. Greg first carved this master piece out of wood, then the carving was used in the production of this beautiful full color patina solid bronze sculpture. Please email us if you would like a larger image of the this beautiful work of art. 17"L. X 11 ½ " X 11". Brass plate "Good Jist Bout Anywhere". The base is made of black walnut and granite, to give the perfect effect of the Bronze fish swimming in a stream.

A stunning decorative creation for your rustic retreat and one of our personal favorites, this solid bronze candle holder was cast from a white pine cone found on the forested slopes of Oregon's picturesque Mt. Hood. In this case, the cone rests on a flattened side with a single taper cup nestled in the center. The cup, originally fashioned from pine bark, has a sharp point in the bottom to hold a standard taper candle firmly upright. The horizontal position of this beautiful cone offers a unique view into the petals to the central core. FCNDL1TWP. 7 inches wide and 2 inches high.

This beautiful, fully open white pine cone from the forested slopes of Oregon's picturesque Mt. Hood is one of our personal favorites. To create a classic double taper, solid bronze candle holder, we mounted it in the center of a piece of pine bark with a single taper pine bark cup at either end. Each cup has a sharp point in the bottom to hold a standard taper candle firmly upright. The base has small felt pads to protect the surface of your fine furniture. Height: 6-1/2" Base Width: 6- 1/2". TBF-CNDL-2TWP.

Try our solid bronze Wildlife holder and we guarantee that you will receive many admiring comments. Pine sticks with small decorative cones are mounted on a flat vertical base, your choice of elk, moose or mountain scene design. The base attaches to the wall with coordinated mounting hardware, a small soaring eagle at the top and either a small resting elk, resting moose, beaver or open cone at the bottom, no unsightly screws. In addition to our Basic and Traditional patinas, this item is available in Full patina, incorporating various colors appropriate to the scene. TBW-HLDR-TP.

Here's a nifty little single taper candle holder for that small table or shelf tucked away in the corner of your Adirondack cabin or other rustic getaway. This solid bronze candle holder features two tiny, fully open western hemlock cones and one closed lodgepole cone, nestled around a single taper cup. The cup, originally fashioned from pine bark, rests in the center of the cones on a pine bark base and has a sharp point in the bottom to hold a standard taper candle firmly upright. Its weight makes this candle holder quite stable in spite of its small size. F-CNDL- 1TMXC. 1 1/4" Length x 3-1/4" x Width 2". Shown here in the Traditional patina.

This solid bronze version of our single taper candle holder is decorated with three acorns sent to us by a friend who lives in the woods of central Missouri. The bark cup has a sharp point to hold a standard taper candle firmly upright. Acorn pieces are particularly spectacular in Traditional patina as shown. Item F-CNDL- 1T3A. Height 1 1/4 inches, Base Width is 4 inches. Bronze Candle holder shown here in Traditional patina.

These solid bronze full acorns mount cap end to cabinet surface and make beautiful accessories for your smaller cabinets. Item TBF-KBPL-AH. 1-1/4 Diameter x Protrudes 1-1/4. Bronze Full Acorn Cabinet Hardware.

Made In America. Be sure to let us know if you need help with putting your order together. Please email us at sales@flyingcloudgifts.com or call us 1-800-448- 8825. SPECIAL CONTRACTOR PRICES, AND COMPLETE HOME PACKAGES.

BASIC PATINA: finish consists of one coat of patina applied to the rough cast bronze and buffed. A light coat of sealant is then applied to protect the finish. TRADITIONAL PATINA: Finish initially looks exactly like Basic; however, a second application of patina and a light coat of sealant results in a soft coppery appearance, much like a new penny if you diluted the copper color a bit with gold. As with the Basic finish, recessed areas such as the interior of a cone or the low spots on a bark mounting base will be anywhere from slightly to significantly darker than the tips of petals or high spots on bark, depending on whether and how well they can be reached with the buffing pad. Recessed areas such as the interior of a cone or the low spots on a bark mounting base will be anywhere from slightly to significantly darker than the tips of petals or high spots on bark, depending on whether and how well they can be reached with the buffing pad. Because of this, some customers refer to this finish AS ''brassy highlights''. Full patina finish also initially looks exactly like Basic; however, we then apply a combination of blues, greens, grays, whites, browns and blacks appropriate to the scene. Again, these are not paints, but rather chemicals applied to the bronze and heated to produce subtle wilderness colors. A light coat of sealant is then applied to protect the finish. Except for our leaves in the Forest Impressions© line. FULL PATINA: Finish is only available on Wildlife line products. Large image shows from left to right. Basic, Traditional, and Full color patina.